Champion P7-30 Manual User Manual download pdf (Page 16)

Recirculating Pump Trough Connection Kit: P/N 407365

½" Critical Gap

Trough (supplied by others)

Suggested Trough Bafﬂe

(supplied by others)

Trunk Option A

Trunk Option B

Slurry Water

Recirculating

Pump

1½" Pipe

(supplied by others)

1 102448 Elbow, 1" x 90° Brass 1

2 100585 Locknut, 1" NPT Brass 1

3 111557 Nipple RTOE 1" x 2-12" Brass 1

4 111079 Tee, Red. 1-1/2" x 1-1/2" x 1" Brass 1

5 111080 Plug 1-1/2" Brass 1

6 204731 Stub End, Recirc Pump 1

7 107340 Clamp, Hose SST w/CS Screw 2

8 111117 Hose, 1-5/8" I.D. 1

9 104889 Compound, Grey Sealing 1 ft.

Item No. Part No. Qty.Description

Recirculating Pump Trough Connection Kit: P/N 407365

Recirculating Pump Trough Connection Kit P/N 407365

Form # 900822

P-5 Recirculating Pump Trough Connection Kit: P/N 407365

A trough connection kit (See No. 1 below) is shipped with each pulper equipped with a recirculating pump.

The kit is designed to connect the recirculating pump discharge to a waste trough (supplied by others).

Trunk Option A and Trunk Option B (See No. 2 below) are two suggested methods of making the trunk

connection to the trough which is supplied by others.

!! ATTENTION !!

A splash bafﬂe (supplied by others) must be

fabricated and installed in the discharge end of

the trough to create the proper water ﬂow. See

No. 3 at left for a suggested design for the bafﬂe.

The splash bafﬂe must extend across the entire

length of the trough and maintain a 1/2" gap

between the bafﬂe and the trough bottom.

The trough must be removable for cleaning.

Form # 900822

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 71 72

No comments

Champion P7-30 Manual User Manual Page 16