Champion P7-30 Manual User Manual download pdf (Page 26)

18

1. The water extractor Compression Cone

(A) should be adjusted to 3⅞" from the

top of the water extractor housing and

the top of Compression Cone.

The main components of the water

extractor interior are listed below:

A: Compression Cone

Final stage in removing water from

the pulp. The cone has a wiper blade

that pushes the semi-dry pulp down

the conveyor chute.

B: Auger Conveyor Screw

Carries the de-watered pulp from the

bottom of the water extractor up to the

compression cone.

C: Drain/overflow Lever

Raises the drain/overflow tube to drain

the water extractor during cleaning.

D: Drain/overflow Tube

Maintains water level in the water

extractor to prevent overflowing and

to drain the machine.

E: Auger Conveyor Brush

Attached to the auger conveyor screw.

The brush sweeps across the water

extractor screen in order to keep the

screen clean and allow slurry water to

flow from the pulp.

F: Extractor Screen

Allows water to flow off the auger

conveyor screw and back to the bottom

of the water extractor. The auger brush

sweeps the screen to keep it from

becoming clogged with pulp.

Initial Start-up - Pulper/Water Extractor

3⅞"

A

D

C

B

F

E

[98mm]

Wiper blade

Auger

Cone

Water Extractor Mechanical Adjustments

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 71 72

Comments to this Manuals

No comments